H&K Plant Tour
We are an expert in urethane and respond to the needs of all our customers, both domestically and abroad.
On this page, we will introduce the various manufacturing and testing facilities we possess at our Chiba Plant.
Product Warehouse: The warehouse where products are stored.
Manufacturing Building: Plants manufacturing products and their facilities.
Manufacturing kettle: The kettle for manufacturing the product (100L~).Contact us separately for the production volume.
Office and Research Building: Building where office, quality control and R&D departments enter.
Kettle for Small-Volume production: 75L dissolver type vacuum stirrer.
Penetrator:Penetrater adopted in JIS and ISO standards.
Needle Vibration Hardening Measuring Instrument: Needle Vibration Type Hardening Measuring Instrument.The behavior until the resin is completely cured can be measured.
Ball Tack Tester: An instrument that performs a ball tack test that evaluates stickiness.
TPE-100 Type Viscometer: cone/plate type viscometer integrated with temperature control system.
Karl Fischer Moisture Analyzer: For measuring the moisture of raw materials and products.
Temperature and Humidity Testing Chamber: Equipment capable of adjusting temperature and humidity.
Antiweatherability Testing Machine:Xenon lamp type weather resistance tester. The weather resistance of the resin can be measured by irradiating a light beam close to sunlight.
Two-Dimensional Engraving Machine: Two-dimensional engraving machine for cutting test piece
Notch Machine for Impact Test: Equipment for notching test pieces for Charpy impact test and Izot impact test.
Impact tester: Equipment for measuring Izod and Charpy impact strength.
Tensile, Bending and Compression Testing Machine (Stolograph): Tension tester with mark-to-mark tracking device.Bending and compression characteristics can also be measured.
Load Deflection Temperature Measuring Instrument: Instrument for measuring the temperature when a load is applied to a test piece and deflected by a certain amount.
Tensile, Bending and Compression Testing Machine (Autograph): Equipment for measuring tensile, bending, and compression properties attached to temperature chambers.
Planetary Mixer (Small): A stirring device that can heat and mix approximately 1L of liquid in vacuo.
Planetary Mixer (Large): A stirring device capable of heating and mixing up to about 16L of liquid under vacuum.
Vacuum Casting Machine: Device capable of vacuum-casting using silicone mold or metal mold.
Laboratory: Experts learn about polyurethane resin development on a daily basis.
BM Type Viscometer: An instrument that measures the viscosity of a product.
Hardness Meter: A hardness meter widely used in Japanese and overseas standards such as the JIS standard.
2-Liquid Mixing and Discharging Machine (Lexy Co., Ltd.): A liquid and a B liquid are mixed and stirred and injected into a resin type or the like.Can be dispensed from 2 ml/s to 8ml/s.
2 Liquid Mixing and Discharging Machine (Nihon Sosey Industry Co., Ltd.): discharging machine capable of mixing A component and B component, stirring and injecting into a resin mold etc. Up to 100ml/s can be dispensed.
Product Warehouse
Manufacturing Building
Manufacturing Kettle
Office and Research Building
Kettle for Small-Volume Production
Penetrator
Needle Vibration Hardening Measuring Instrument
Ball Tack Tester
TPE-100 Type Viscometer
Karl Fischer Moisture Analyzer
Temperature and Humidity Testing Chamber
Antiweatherability Testing Machine
Two-Dimentional Engraving Machine
Notch Machine for Impact Test
Impact Tester
Tensile, Bending and Compression Testing Machine (Stolograph)
Load Deflection Temperature Measuring Instrument
Tensile, Bending and Compression Testing Machine (Autograph)
Planetary Mixer (Small)
Planetary Mixer (Large)
Vacuum Casting Machine
Laboratory
BM Type Viscometer
Hardness Meter
2-Liquid Mixing and Discharging Machine (Lexy Co., Ltd.)
2-Liquid Mixing and Discharging Machine (Nihon Sosey Industries Co., Ltd.)